Wrought iron porch railings – Unless they are galvanized metal surfaces eventually oxidize when exposed to moisture. If untreated, these surfaces eventually corrode to the point of virtual decomposition. If they are rusty their iron porch railings, you can enhance your appearance and preserve them from future damage by coating with the right kind of paint. Before you begin, you must seal the oxide with a special type of primer, or is likely to see a repeat of the problem.
Clean the wrought iron porch railings using a pressure washer. Wait 1-3 hours in the porch railing to dry. Place the sheets of fabric dust under counter. Put on gloves. Scrape the rust using a wire brush. Use sandpaper 80 grit to remove small pieces of mold.
12 Photos Gallery of: How to Paint Wrought Iron Porch Railings
Shield wrought iron porch railings with iron oxide primer, using a manual compactor. Use a brush to apply primer to the areas not accessible to the roller rail. Wait two hours for the primed porch railing to dry. Wash your painting tools with turpentine. Shield railing primed with an iron based metal enamel oil using a compactor and a brush. Use a new cover, clean the roller. Wait at least 2 hours for the painted porch railing to dry. Check the label on the paint can by the real recommended drying time.